Â鶹ÊÓƵ

The new Â鶹ÊÓƵ Wi-Fi Extender is a powerful 802.11 ax Wireless Tri Band Extender that supports the latest Wi-Fi technology, Wi-Fi 6E.Ìý It offers seamless roaming, band steering, and Self-Organizing Networks (SON) technology.

Wi-Fi 6E provides a new band of Wi-Fi spectrum operating on the 6 GHz frequency that leverages the advanced speeds available with Wi-Fi 6 (which brought 802.11ax support). The 6 GHz band provides up to seven different 160 MHz wide channels to use while the 5 GHz band only has two.

Ìý

Step by step instructions are listed below, at or by scanning the QR code below.

Step by Step Instructions:

Make sure your router has an internet connection before setting up the Â鶹ÊÓƵ Wi-Fi Extender.

Step 1: Confirm Internet Connection.
Before setting up the Â鶹ÊÓƵ Wi-Fi Extender, make sure the router or gateway you use to connect to the internet is working properly.

Step 2: Plug it in.
Connect the Â鶹ÊÓƵ Wi-Fi Extender to the power adapter and plug itÌý into a power outlet next to the router or gateway and wait for its light to turn solid yellow.

Step 3: Pair it.
Press and hold the pair button on the Â鶹ÊÓƵ Wi-Fi Extender for 3 seconds. Then within 2 minutes,Ìý depending on the equipment that came with your service, press and hold the pair button for 3 seconds on the router or press and release the pair button on the gateway. The lights on both devicesÌý will blink blue while pairing. Once paired, it could take up to 8 minutes before you see a solid white or blinking yellow light on the Â鶹ÊÓƵ Wi-Fi Extender. Do not unplug if you see a blinking white light.

Step 4: Move it.
Unplug the Â鶹ÊÓƵ Wi-Fi Extender. Move it between the router or gateway and the weak Wi-Fi coverage area, then plug it in. If you see a fast blinking yellow light, try moving it a bit farther away from the router or gateway. If you see a slow blinking yellow light, try a bit closer. A solid white light means you have it in the right spot and your setup is complete.

Ìý

Yes.Ìý The Â鶹ÊÓƵ Wi-Fi Extender is designed to work with the Â鶹ÊÓƵ Router or Fios Router. If the Â鶹ÊÓƵ Wi-Fi Extender is paired with either one of the routers, a factory reset is required in order to re-connect to the other router.Ìý

No.Ìý The Â鶹ÊÓƵ Wi-Fi Extender is designed to work with the Â鶹ÊÓƵ Router or the Fios Router.Ìý The extender pairs with the router through Wired Protected Setup (WPS).Ìý Once paired, the Â鶹ÊÓƵ Wi-Fi Extender clones (replicates) the Wi-Fi Name/Password from the router with no manual configuration.Ìý The Â鶹ÊÓƵ Wi-Fi Extender is designed to communicate with a dedicated Wi-Fi 6E backhaul to the Â鶹ÊÓƵ Router or 5GHz to the Fios Router, providing a high speed Wi-Fi connection.

You need to reboot the device by removing power.Ìý Within 3 minutes of the reboot, the Wi-Fi Name(s) should be configured on your Â鶹ÊÓƵ Wi-Fi Extender.

If the Wi-Fi Names are not configured after a reboot, attempt manual pairing with the Â鶹ÊÓƵ Router.Ìý Manual pairing requires the Unified Button to be depressed on both devices as described in FAQ #3.Ìý Please refer to the sequence of lighting in FAQ #6 for manual pairing.ÌýÌý

ÌýÌýÌýÌýÌýÌýÌýÌýÌý

The status LED will be on white and solid when your Â鶹ÊÓƵ Wi-Fi Extender is turned on, connected to the Internet, and functioning normally. Refer to the chart above for additional details.

Ìý

Some homes or businesses may be too large for the router’s Wi-Fi signal to cover the entire location.Ìý There could also be types of interference, such as walls, microwaves, cordless phones, etc., that can weaken the Wi-Fi signal.Ìý

Wi-Fi extenders help extend the reach of the Wi-Fi signal in locations of your home where the Wi-Fi signal is weak or no signal is available.Ìý To get the most out of your Â鶹ÊÓƵ Wi-Fi Extender, place it between your compatibleÌý router and the weak Wi-Fi area.Ìý Reference the table below to ensure you have placed the Extender in an optimal location.

Disclaimer: The Â鶹ÊÓƵ Wi-Fi Extender is designed to extend your router’s Wi-Fi coverage, not to increase your Wi-Fi speed.Ìý Actual Wi-Fi speeds will vary due to network and environmental factors, including network traffic volume, building materials, device demands, and network overhead.ÌýÌý

Ìý

Ìý

Yes.Ìý The Â鶹ÊÓƵ Wi-Fi Extender also supports a hardwired connection with Coax or Ethernet.Ìý Please follow the instructions below for a hardwired connection.

• Connect the Â鶹ÊÓƵ Router to a coax or Ethernet outlet.
• Connect the Â鶹ÊÓƵ Wi-Fi Extender to a coax or Ethernet outlet, ideally in an area with spotty Wi-Fi coverage.
• Ensure your router and Â鶹ÊÓƵ Wi-Fi Extender are connected to an electrical outlet.
• The light on the extender should turn solid white within a few minutes, indicating the connection is complete.

All Wi-Fi enabled devices that support the 802.11g, 802.11n (Wi-Fi 4), 802.11ac (Wi-Fi 5), and 802.11ax (Wi-Fi 6 & 6E) standards (laptops, tablets, smartphones, gaming consoles, TV’s, etc. ) can be connected to the Wi-Fi Extender.

Yes. Guest Wi-Fi is supported.Ìý If yourÌý compatibleÌý router has Guest Wi-Fi enabled, the Â鶹ÊÓƵ Wi-Fi Extender will also broadcast the Guest Wi-Fi name.

Yes, the Â鶹ÊÓƵ Wi-Fi Extender supports Tri-Band Wi-Fi, or 3 unique Wi-Fi bands. The extender broadcasts on the 2.4, 5 and 6 GHz bands. By default, the 2.4 and 5 GHz bands are enabled and are managed together by Self Organizing Networks (SON) to use the same Wi-Fi name and password; and the 6 GHz band can be enabled and used for devices, when no extender is connected or when the router and extender are set in a hard-wired configuration.

No.Ìý Based on the Digital Transfer Content Protection guidelines, a Wi-Fi-connected set-top-box can’t be supported.Ìý AÌý set-top-box would need to be directly connected to the router.Ìý For more information on DTCP, please visit the following link.Ìý

The Â鶹ÊÓƵ Wi-Fi Extender should be placed between your compatibleÌý router and the area where your Wi-Fi signal is weak.Ìý Please refer to FAQ # 8 for further information on optimal placement of the extender.Ìý

To minimize any Wi-Fi signal weakness the extender should ideally be placed:

• At least 10 feet from cordless phones or microwaves
• Away from heat sources, moisture, excessive dust or extreme cold
  
• Away from any large metal objects,Ìý

If you currently have a previous generation Wi-Fi extender, and are currently using or upgrading to the Â鶹ÊÓƵ Router, an upgrade to the new Â鶹ÊÓƵ Wi-Fi Extender is required if you choose to connect your extender to the Â鶹ÊÓƵ Router over Wi-Fi (backhaul).Ìý If you choose a wired connection to the router, previous generation extenders, like Fios Extender (E3200),Ìý support both Coax (MoCA) and Ethernet (backhaul) connections to the router.

The Â鶹ÊÓƵ Wi-Fi ExtenderÌý supports WPA2/WPA3 Wi-Fi Security.Ìý WPA2 (Wi-Fi Protected Access II) is the default Wi-Fi security.

Rebooting the Â鶹ÊÓƵ Wi-Fi Extender simply requires removing it from the power outlet, and plugging it back in.

Pressing and holding the reset button located on the side of the Â鶹ÊÓƵ Wi-Fi Extender will restore the extender to the factory default settings. Use the pointed end of a paperclip to press and hold the button for 3-5 seconds.

Yes.Ìý Wall mount brackets for Â鶹ÊÓƵ Wi-Fi Extenders are available at the Â鶹ÊÓƵ Accessory site.Ìý Please visit verizon.com/home/accessories and look for wall brackets.

Yes.Ìý The Â鶹ÊÓƵ Wi-Fi Extender, Model # CE1000A, should always be kept in an upright position for optimal performance.

Some devices may need their Wi-Fi drivers updated to support routers which use Wi-Fi 6 (802.11ax).Ìý Also, some devices, like TV's and laptops, may not support the latest Wi-Fi technology used by an advanced router, and may need to be disabled.

Note: Intel Wireless adapters supporting 802.11ac with older drivers might not show Wi-Fi 6 (802.11ax) networks.Ìý Please see the link below to verify/update to the latest Wi-Fi drivers.

Ìý

Yes, Wi-Fi divers should always be updated for optimal Wi-Fi performance.Ìý In many cases, but not all, Wi-Fi drivers are automatically updated, with auto updates enabled.ÌýÌý

Note: Intel Wireless adapters supporting 802.11ac with older drivers might not show Wi-Fi 6 (802.11ax) networks.Ìý Please see the link below to verify/update to the latest Wi-Fi drivers.

Ìý